Chain Identification Chart
Contained within the chart below you will find the chain identification makings found commonly on chains. These markings may not relate to a manufacturers actual part number.
The chain manufacturers name is usually stamped on the tie strap, and the marking below will be found on one side of the drive link.
You should be able to tie everything back to the first column which is the name we use for the chains on our website.
Please read the note below the chart if you have a Stihl chain.
|
Our |
Pitch |
Gauge |
Carlton |
Oregon |
Windsor |
McCulloch |
Stihl* |
Husqvarna |
Dolmar |
Sarp |
|
Name |
|
|
|
|
|
|
|
|
|
|
|
Type 25 |
1/4" |
0.050" (1.3mm) |
E1 |
25 |
50K |
~ |
~ |
~ |
~ |
25 |
|
Type 90 |
3/8" |
0.043" (1.1mm) |
N |
90 |
43RG |
~ |
~ |
~ |
~ |
E1 |
|
Type 91 |
3/8" |
0.050" (1.3mm) |
N1 |
91 |
50R |
MINI 370 |
3~6 |
H36 |
~ |
E3 |
|
Type 95 |
0.325" |
0.050" (1.3mm) |
K1-NK |
95 |
~ |
~ |
~ |
H30 |
~ |
G30 |
|
Type 20 |
0.325" |
0.050" (1.3mm) |
K1 |
20 |
50J |
320 |
3~2 |
~ |
82 |
G3 |
|
Type 21 |
0.325" |
0.058" (1.5mm) |
K2 |
21 |
58J |
328 |
5~2 |
H25 |
83 |
G5 |
|
Type 22 |
0.325" |
0.063" (1.6mm) |
K3 |
22 |
63J |
323 |
6~2 |
H28 |
84 |
G6 |
|
Type 72 |
3/8" |
0.050" (1.3mm) |
A1 |
72 |
50A |
370 |
3~3 |
~ |
101 |
D3 |
|
Type 73 |
3/8" |
0.058" (1.5mm) |
A2 |
73 |
58A |
378 |
5~3 |
H42 |
93 |
D5 |
|
Type 75 |
3/8" |
0.063" (1.6mm) |
A4 |
75 |
63A |
373 |
6~3 |
H45 |
110 |
D6 |
|
Type 58 |
0.404" |
0.058" (1.5mm) |
B2 |
58 |
58B |
408 |
~ |
~ |
~ |
~ |
|
Type 59 |
0.404" |
0.063" (1.6mm) |
B3 |
59 |
63B |
403 |
~ |
H64 |
103 |
F6 |
*Stihl chains are usually stamped in two places. The first number in the chart being on the drive link itself, this is the gauge of the chain, and the second number on the chart on the depth gauge in front of the cutting tooth.
E&OE - Whilst care has been taken compling this chart, NewSawChains accept no liability for incorrect information.